Custom Aluminum Composite Panels

Any Color Any Size Any Core Your Logo

Any size. Any core.
Your logo on every wrap.

We cut panels to your exact dimensions, build them with the thickness and core your project calls for, and match any color you specify. Every one ships wrapped in protective film printed with your logo, and certified for the US, EU, and Asia markets, so you can quote any job anywhere.

Request your specs →

Aluminum composite panels wrapped in custom-branded protective film

Your logo. Every panel.

Built to your spec, not off a shelf.

Most ACP suppliers sell you what's already in stock. We manufacture to the size, thickness, core, and color your drawings actually call for, factory-direct, with no middleman markup. Tell us the project and we'll build the panel that fits it.

Cutaway diagram of an aluminum composite panel showing protective film, paint finish, aluminum skin, adhesive layer, and polyethylene core

Five layers, engineered to perform

Every panel is the same proven sandwich: aluminum bonded to a solid core, finished the way your project needs.

Protective filmPeel-off film on every panel, printed with your logo, protects the finish until install.
PE/PVDF paint finishWeatherable coil coating, matched to any color you specify.
Aluminum skin0.20–0.50mm aluminum face bonded to the core.
Adhesive layerBonds the aluminum skins to the core on both faces.
CorePE, FR, or A2 mineral core, selected for the fire rating your project needs.

Mirrored on the reverse face for a fully symmetric panel.

Configure the panel

Every dimension below is available factory-direct. Mix and match to your project's requirements.

Thickness

3mm 4mm 6mm

Aluminum skins from 0.20mm to 0.50mm per side.

Core material

PE core FR core A2 core

Standard, fire-retardant, and non-combustible mineral cores.

Finish & color

PVDF Kynar 500 PE coating Custom color match

Any color, not limited to standard stock finishes.

Panel size

Cut to length Cut to width

No standard-size compromises. Built to your drawings.

Trim and channel systems, either way

Ordering in bulk or ordering small, your panels arrive ready to install.

Bulk orders

Ordering in volume, we can manufacture a custom trim and channel system built around your project.

Smaller orders

J-Channel H-Channel

Running a smaller order, we guarantee your panels fit the trim and channel system you're already using. No special tooling required.

Production line manufacturing aluminum composite panels

Manufactured to your drawings, not a catalog

Send us the width, length, thickness, core, and color your project needs. We run it on our own lines and ship factory-direct, so you're not paying a distributor's markup for a panel you could have ordered custom in the first place.

When it's ready to ship, every panel goes out wrapped in protective film printed with your logo and contact information, so it's still selling your business when it lands on the jobsite.

Tested for every market

Qualified globally

We're not just qualified for the US, EU, and Asia. Every core and finish combination is tested and documented against the standards your market requires, so your project's paperwork is ready before the panels ship, wherever the job is.